How to clean and maintain your bike
10th March 2020
- A couple of buckets
- Sponges and rags
- Bike cleaner, chain lube and polish if you want to go the extra mile.
- Bike cleaning brushes
- A garden hose to save you some leg work
How to hose down your bicycle
Depending on just how dirty your bike is, this may not be necessary, but it is important to get rid of any large clumps of dirt that may have attached themselves across the bike. This will save you simply rubbing that dirt across the bike and making it dirtier.
How to look after your bicycle's chain
Cleaning the chain can potentially be painful, if you don’t watch out for your fingers! To avoid this, raise your back tyre off the ground, then you can spin the pedals and move the chain rather than trying to get in all the nooks of a moving part. Generously apply the de-greaser to the chain and use an old rag to run the chain through. Keep doing this until you are satisfied the chain is clean and running smoothly.
How to clean your drivetrain
The drivetrain can be tricky. If you have the tools and the know-how to remove it from the bike this would be the best option. However, if you can’t, removing the wheel is best practice. This will give you better access around the drivetrain and allow you to be more thorough by getting behind it. Another handy tip is to use bike cleaning brushes or if you don’t have any to hand an old paint or tooth brush.
How to maintain your bike's wheels and frame
Use a soft sponge to wipe over the bicycle, starting from top to bottom to avoid dripping dirty water on the clean parts. Use a bike cleaning spray or a soap to go over the frame and wheels then wipe off the suds with clean water. For the fiddlier bits, for example under the seat and between the spokes, use a clean brush to get in between them. Don’t forget about the brake pads, get rid of any grit or dirt under them. This will make them last longer and stay reactive. Again, if you can take the wheels off it will make the process easier.
How to dry and lubricate your bike after cleaning it
If the conditions are right you could leave your bike to air dry - but if not, use a clean rag to remove the excess water. After you have dried the bike, it is important to use some WD40 or another water displacer to avoid rusting. The last job is to make sure that all the pieces operate smoothly. Use the chain lube to ensure that the chain does its job effectively. Slowly work your way along the chain to make sure you cover every part. All the rollers, pins and inner face plates must be done to make sure they all work together to give you the smoothest ride.
Make sure that you properly reattach anything you have removed. Test your brakes and gears to make sure your bicycle is working safely and effectively.
At ONE PRO we understand that your bike is your pride and joy and we want to protect it. That’s why our dedicated team is always happy to help should you have any questions regarding your insurance. For more information, check out our FAQs or find out more about our cycle insurance options.
This is a marketing article from ONE PRO.
Related Articles & Guides
Bicycle security advice
With almost 400,000 bikes stolen in the UK each year bicycle security is big business and should be front of mind for all bicycle owners. Getting your bike insurance sorted is a good starting point, but an insufficiently secured bike could mean the difference between a successful or unsuccessful insurance claim.
Build Your Cover
Bike & Accessories
With our Bike + Accessories product, you have the option to tailor your cover to suit your needs, whether you are insuring one bike or five, with up to £25,000 cover. Alongside that we also offer packages to protect you as a rider.